30 Series - 7.0 Inch Driven Pulley - 5/8 Inch Bore - Torque Converter Go-Kart Mini-Bike

30 Series - 7.0 Inch Driven Pulley - 5/8 Inch Bore - Torque Converter Go-Kart Mini-Bike30 Series Torque Converter 7. 0 Inch Driven Pulley Assembly 5 8 Inch Bore This 30 series driven clutch pulley assembly is the torque converter for atvs, utvs and go karts with 5 8 inch shafts. Driven clutch details: Overall OD of pulley: 183mm (7. 2 in) Asymmetric 5 8 inch bore 3 16 inch key way Red tension spring Replaces Comet and Manco 219457A Known to fit 8hp 18hp engines with 5 8 inch horizontal shafts. Check pictures and measurements to be sure

30 Series Torque Converter 7.0 Inch Driven Pulley Assembly - 5/8 Inch Bore 

This 30 series driven clutch pulley assembly is the torque converter for atvs, utvs and go-karts with 5/8 inch shafts. 

Driven clutch details:

• Overall OD of pulley: 183mm (7.2 in)
  
• Asymmetric
• 5/8 inch bore
• 3/16 inch key way
• Red tension spring
  
• Replaces Comet and Manco
  
• 219457A

Known to fit 8hp-18hp engines with 5/8 inch horizontal shafts.  Check pictures and measurements to be sure this is the correct clutch for your application.

Do you have a 20 series or 30 series torque converter?

20 series pulleys and belts are shaped like a V.  They use a belt that is cut at the same angle on both sides.  20 and 30 series torque converters are the same size, but the belt on the 30 series unit is wedge shaped.  The pulley will have a flat side.  Please make sure you identify which torque converter you have before ordering.

Shipping details:

Do you need your torque converter parts fast?  If you order before 3:00 pm CST, Monday thru Friday, your order goes out the same day.  Buy now!