SKU: 4937955893

APR - 2.5 TFSI EVO Turbocharger Inlet System

Sale price$494.98 Regular price$549.98
Save 10%

Pay in installments of $137.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 24 - Sep 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

APR - 2.5 TFSI EVO Turbocharger Inlet SystemFits Audi RS3 17 20, TT RS Quattro 18 22 Overview The APR Turbocharger Inlet System outflows the factory components by up to 45%, and jumps to 60% when adding the APR Intake Filter. This is firstly achieved through elimination of the most critical restriction in the entire intake system, the turbocharger inlet pipe. Because of this restriction, no intake airbox filter design can physically match the gains achieved by upgrading to the APR Turbo Inlet

Fits Audi RS3 17-20, TT RS Quattro 18-22

Overview

The APR Turbocharger Inlet System outflows the factory components by up to 45%, and jumps to 60% when adding the APR Intake Filter. This is firstly achieved through elimination of the most critical restriction in the entire intake system, the turbocharger inlet pipe. Because of this restriction, no intake airbox / filter design can physically match the gains achieved by upgrading to the APR Turbo Inlet System alone. This inlet is the first step one should take when upgrading their intake system and paves the way for even more gains by adding the optional intake filter. The APR Turbocharger Inlet System uses a massive 4" carbon fiber inlet tube that attaches to the factory airbox, or the APR Intake Filter System. Attached to the carbon fiber tube is a massive 4" cast aluminum inlet which is organically shaped to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Despite the visually odd shape, keeping the cross-sectional area as large as possible is the key to the pipe's performance gains, and greatly outflows smooth looking continuously tapering designs. Interlocking adapter rings form a port-matched ideal entrance to the turbocharger, while larger rings (sold separately) provide port-matched support for even larger hybrid turbocharger upgrades. A thick stainless-steel heat shield protects the pipe from the hot turbocharger manifold, and an external stainless PCV pipe provides proper PCV placement without impacting the inlet's design. Finally, adding the optional APR Intake Filter completely transforms the system from subtle to extreme. Our massive 9" long cotton filter with frontal opening connects to a 6" carbon fiber inlet tube that gradually necks down to the 4" back tube. You will hear every ounce of the 5-cylinder turbocharger system's massive demand for airflow, and you'll do so at a 60% CFM improvement over stock! This was only possible with an open filter system as the airflow demands called for an unboxed design. Simply put, this is the best intake system on the market for satisfying uncompromisingly demanding airflow requirements.

Features:

  • Massive cast 4" turbo inlet
  • Massive 4" carbon fiber tube
  • Work with the factory intake or APR intake filter
  • Works with various turbos with the interchangeable adapter rings
  • Heat shield included
  • Massive flow gains (45% over stock and 60% over stock with the APR Filter)
  • Increased horsepower and torque
  • Better throttle response
  • Enhanced engine sound
  • All mounting hardware included

Specs

Brand APR
Category Air and Fuel Delivery
Emission Code 7
Material Carbon Fiber, Cast 356-F Aluminum
Product Type Intake Systems (Inlets)
Sub Category Service Kits
Version Kit - Turbo Inlet + Back Tube
UPC 810009930808
Part Number CI100038

Emissions

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Tech Resources

Please note, this system does not fit Right Hand Drive (RHD) vehicles. CI100038-G is required for 2019+ vehicles.

The Inlet Restriction

The factory cast inlet pipe is small. It has a maximum internal diameter of 2.8”, at the widest point, and is internally restricted as illustrated in the photos. This pipe is only capable of achieving a maximum of 490 CFM at 28” of H2O when tested alone. Attaching any intake system to this pipe will only result in a lower flow rate, and when using the factory back pipe, airbox, filter and inlet scoop, airflow drops below 430 CFM.

The APR Solution

Our cast inlet pipe is huge and on its own it achieves a staggering 710 CFM with the stock turbocharger adaptor! This is a 45% improvement over the factory part. When paired with the APR Intake Filter System, airflow only drops to 690 CFM, a 60% improvement over the entire stock intake system! When attached to the factory airbox, filter and frontal scoop, airflow drops to 575 CFM, which is 34% better than the stock system and 17% better than the stock inlet by itself with an ideal entrance. This further clarifies the point that no intake can outperform the APR turbo inlet if the factory turbo inlet is left intact.


APR’s engineers tested a multitude of other turbocharger inlet designs in pursuit of more flow and power. It was quickly determined the part could not act as an upgrade on its own because of the significant increase in diameter required. The rear inlet pipe also had to be upgraded to utilize this larger diameter. Other designs, which may look smoother, and offer a continuously reducing taper, are extremely limited. At 3.5”, 550 CFM is achievable. At 4” 560 is achievable. In contrast, our system achieves 710 CFM under the same test. Given how restrictive these other designs are, upgrading to our system, while still using the factory airbox, filter and frontal scoop, will outflow any intake system!

Inlet Pressure Drop

APR’s Engineers fully instrumented the engine with pressure sensors and thermocouples (fast response temperature sensors) to further illustrate the effects this product has on the system as a whole. In the simplest terms, this upgrade allows the turbocharger to operate at a lower pressure ratio, which means it will operate more efficiently. It reduces the restriction on the inlet of the turbocharger, allowing the inlet to see closer to ambient pressure conditions. This directly translates to lower pre-turbine back pressure (EMAP), lower turbocharger shaft speed, lower turbocharger compressor discharge temperature, and for the ability to achieve higher boost pressure levels. The following data was collected with ambient conditions sitting around 985 mbar, 29.4C with 66% relative humidity. The vehicle was setup as Stage 1 (93) with stock hardware, vs Stage 1+ (93) with the APR Inlet. The depression at the inlet decreased by 112 mbar, emap decreased 360 mbar, compressor discharge temperature dropped 14c and the engine was able to achieve 106 mbar more boost pressure by redline. This directly translated to more horsepower and torque, while everything ran cooler and more efficiently.

Dyno Testing

The APR Inlet System greatly outflows the factory inlet system, and for this reason, APR’s engineers have created a Stage 1+ ECU to take full advantage of the upgrade. While Stage 1+ is designed for use with an intercooler system, we tested the upgrade with the factory intercooler system to illustrate the gain from the inlet alone. In doing so, the APR Inlet system gained as much as 14 WHP and 11 WFT-LBS of Torque! When adding the APR Intake Filter to this setup, gains grow even further towards redline, adding up to a gain of 32 WHP and 24 WFT-LBS of Torque! When the inlet alone is combined with the APR Intercooler system gains grew further to 37 WHP and 29 WFT-LBS. Gains will continue to grow as higher demands are put on the system via higher stages of performance.

Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 4937955893

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Spo509
Cuba, US
★★★★★ 3
Not as good as chuck it anymore
Style: Fetch Balls (Pack of 10), Size: 2.5 inch
I have bought these before and the where just like the chuck it balls. These are not those balls. The are lighter and my dog has already cause damage to one
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 16, 2026
S
Verified Purchase
SueK
Omaha, US
★★★★★ 5
Great for heavy chewers! Belgian Malinois Approved!
Color: E) 8-Pack 2.5" Balls (Yellow)
I bought these 6 months ago because my dog kept loosing his Kong balls. These were such a better price ball (but still had good reviews) that I thought I would give them a try. They are wonderful. After six months of chewing and chasing and playing with a Belgian Malinois, the two that I’ve gotten out are still in great condition. The bright color makes them easier to find, so none have been permanently lost yet. They are bouncier and a little bit lighter weight compared to the Kong balls of the same size, which I honestly appreciate because my maligator likes to shoot them at my feet. So far the material seems high quality and I feel safe letting the dog chew on it for hours on end. The 8 pack was cheaper than 2 Kong balls. A great deal for a great product!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
A
Verified Purchase
Amazon Customer
Waukegan, US
★★★★★ 5
Durable, high-bounce dog balls that hold up well to energetic play
Color: D) 4-Pack 3" Balls (Yellow)
The Chew King 3-inch rubber balls have been great for active play sessions. The rubber feels thick and durable, and the bounce is surprisingly lively compared to many standard dog balls. They’re the perfect size for medium to large dogs and are easy for dogs to carry, chase, and retrieve. After repeated games of fetch, the surface has held up well without cracking or losing its shape. One thing that stands out is how easy they are to clean. Dirt and slobber rinse off quickly, so they’re ready for the next round of play. The bright color also makes them easier to find in grass or bushes compared to darker toys. For longer life, it helps to supervise play if your dog is a very aggressive chewer, since these are designed more for fetch than constant chewing. Also, rotating toys every few days can keep dogs more engaged and extend the lifespan of each ball. Overall, this is a solid set of durable fetch balls that provide great bounce and reliable outdoor playtime fun.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 5, 2026
W
Verified Purchase
WilliamR
Houston, US
★★★★★ 5
toughest dog balls in the world
Color: E) 8-Pack 2.5" Balls (Yellow), Color: E) 8-Pack 2.5" Balls (Yellow)
best balls in the universe. I have a 70# pit bull and a 120# presa canaria. All the other balls I bought lasted maybe 3 weeks, I have had these for over a year and play with them and the dogs 5-6 days a week. They still look brand new, They seem like they will last a year or so and they are both serious chewers. A presa has a bite force od about 525psi, twice a pitty
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
Z
Verified Purchase
ZZmum
Chelsea, US
★★★★★ 5
They worked out great!!!
Color: D) 4-Pack 3" Balls (Yellow), Color: D) 4-Pack 3" Balls (Yellow)
So far have been the solution we were looking for! I was extremely tired of the non stop destruction and order of large Chuckit balls for our high energy/high drive dog. For about the same price I bought four 3 inch balls to test out their durability and fit for the thrower. THEY WORK! Perfection! They even make a fun whistling sound as they sail through the air. They do require a tad more muscle in the thrower but that is not a problem. They have already shown to be WAY more durable. The 3 inch balls work in the large chunkit thrower. Super find.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026

recommand products