N1C LX-Series N1C.LX3000 - UPS - 2700 Watt - 3000 VA

Meet the N1C.LX3000, a premium online double-conversion UPS designed to safeguard your critical equipment with unwavering power quality. Perfect for servers, networking gear, workstations, and other sensitive electronics, this 120V UPS delivers continuous, clean power even during outages, voltage sags, and transient disturbances. Built around Lithium‑Ion technology, it offers improved cycle life, faster recharge, and a lighter footprint compared with traditional lead‑acid designs, helping you protect valuable data, maintain uptime, and reduce total cost of ownership. Ready for remote management, the N1C.LX3000 ships with an SNMP card to enable proactive monitoring and alerts, backed by WiseInsight software for centralized visibility and control.

• Reliable online double-conversion protection: The N1C.LX3000 provides continuous, pure sine wave output with online double-conversion topology. This means zero transfer time for critical loads, pristine voltage regulation, and superb protection against surges, disturbances, and outages. With a capacity of 2700 watts (and 3000 VA), it powers a broad range of equipment while preserving performance and longevity.
• Lithium‑Ion battery technology for longer life and faster recovery: Lithium‑ion chemistry delivers a longer cycle life, lighter weight, and faster recharge than traditional lead‑acid batteries. This translates into more usable runtime when you need it and a quicker return to service after an outage, along with reduced maintenance intervals. The battery is UL1642 certified, contributing to safer operation and compliant performance in certified environments.
• Comprehensive safety and compliance suite: The N1C.LX3000 carries important certifications including UL1642 for the battery, UL1778 (TÜV) for overall UPS safety, CSA C22.2 No. 107.3, FCC Part 15 Class A for electromagnetic compatibility, and UN38.3 for safe battery shipment. These certifications help you meet regulatory requirements and install with confidence in workplaces, data centers, or IT closets.
• Built‑in monitoring with SNMP and WiseInsight: A SNMP card is included to enable remote network monitoring and alerts, ensuring you stay informed about health, battery status, and load. Paired with WiseInsight software (free) for centralized monitoring and management, you can scale visibility across multiple units, receive proactive notifications, and simplify asset management.
• Designed for 120V environments with practical management features: The 120V input/output design makes integration straightforward for most office and data-center spaces. The N1C.LX3000 supports streamlined maintenance and upgrades, including firmware updates and integration with existing network management workflows. Its compact form factor and robust protection capabilities make it a practical choice for protecting servers, network switches, storage devices, and workstations.

Technical Details of N1C.LX3000

• Power Rating: 2700 watts (W) continuous output; 3000 volt-amperes (VA) rating for apparent power.
• Topology: Online double-conversion UPS providing constant output quality with seamless transfer protection.
• Input Voltage: 120V AC standard supply for typical North American installations.
• Output Voltage: 120V AC, regulated to maintain stable voltage under varying load and input conditions.
• Battery Technology: Lithium‑Ion battery system with safety certifications (UL1642 for the cell chemistry).
• Safety Certifications: UL1778 (TÜV), CSA C22.2 No. 107.3, FCC Part 15 Class A, UN38.3 for battery transport compatibility.
• Remote Management: SNMP card included for network monitoring and alerting; WiseInsight software available for centralized management and reporting.
• Environment and Compliance: Designed to meet standards for safe operation, fire safety, and electromagnetic compatibility in business and data-center settings.

How to install N1C.LX3000

Installing the N1C.LX3000 is a straightforward process designed to maximize uptime and ensure safe operation. Follow these guidelines to set up your UPS efficiently and safely:

1) Choose a suitable location: Place the UPS in a cool, dry, well-ventilated area away from direct sunlight, heat vents, and excessive dust. Leave ample clearance around the unit to allow for proper airflow and maintenance access. Do not block exhaust vents or place the UPS on carpeting or soft surfaces that could impede cooling.

2) Position and orientation: Install the UPS upright on a solid surface. Ensure it is level and stable to prevent tipping. Avoid stacking heavy equipment directly on top of the unit and maintain a comfortable working height for cable management and maintenance tasks.

3) Connect the load: Attach critical devices to the UPS output receptacles. Distribute loads evenly to prevent overloading a single outlet bank and ensure that essential equipment receives clean, uninterrupted power during outages or disturbances.

4) Connect to the mains: Plug the UPS into a dedicated 120V wall outlet or circuit with appropriate amperage to support the expected load. Do not daisy-chain through power strips or surge protectors that could compromise protective functions.

5) Battery initialization and charging: After connection, allow the UPS to charge the lithium‑ion battery for the recommended initial conditioning period (often several hours to a full cycle as per the user manual). During this time, avoid high-load startup surges. The unit will be ready to provide power during a subsequent outage once the battery has reached sufficient capacity.

6) SNMP card setup and software integration: If you plan to use the included SNMP card, install it in the designated slot per the product manual and configure your network management system to receive alerts. Install WiseInsight on your IT management platform to centralize monitoring, asset tracking, and event reporting across multiple UPS units if needed.

7) Firmware and safety checks: Check for any available firmware updates from the manufacturer and apply them following the provided instructions. Regularly inspect the UPS and battery indicators, verify alarms, and confirm that cooling fans operate normally to maintain long-term reliability.

8) Testing and verification: Perform a controlled power-off test during a maintenance window to verify that connected loads switch to UPS power smoothly and that the battery backup performs as expected. Document test results and update the maintenance records for compliance and operational readiness.

9) Maintenance planning: Lithium‑ion batteries have a long life, but periodic health checks are advised. Schedule routine inspections and battery state checks through WiseInsight or your preferred network management tool to ensure early detection of potential degradation and to plan replacement before it becomes critical.

10) Safety cautions: Do not attempt to disassemble the unit or replace the lithium‑ion battery without following the manufacturer’s safety procedures. Use proper personal protective equipment when handling batteries, and adhere to all local electrical codes and regulations during installation and maintenance.

Frequently asked questions

Q: What is the N1C.LX3000 designed to protect?

A: The N1C.LX3000 is engineered to protect critical IT equipment, including servers, network switches, storage devices, and workstations, from power disturbances, outages, and surges. Its online double-conversion topology delivers clean, stable power to sensitive loads, minimizing the risk of data loss and equipment damage during power events.

Q: What is the significance of the lithium‑ion battery in this UPS?

A: Lithium‑ion batteries offer a longer lifecycle, lighter weight, and faster recharge compared with traditional lead‑acid options. This means longer usable runtime between charges, quicker recovery after power events, and less frequent replacement cycles. The battery is certified under UL1642 and designed for safe operation within the UPS system.

Q: How does remote monitoring work with the N1C.LX3000?

A: The UPS includes an SNMP card for network monitoring and alerts. When paired with WiseInsight software, you gain centralized visibility into battery health, load levels, runtime estimates, and event notifications. This enables proactive maintenance and rapid response in multi‑site deployments.

Q: Is the N1C.LX3000 compatible with standard 120V infrastructure?

A: Yes. The unit is designed for 120V AC input and output, making it suitable for typical office, data-center, or home IT environments. It simplifies integration with existing electrical systems and commonly used IT equipment rated for 120V.

Q: What certifications does this UPS carry?

A: The N1C.LX3000 carries UL1642 for battery safety, UL1778 (TÜV) for UPS safety, CSA C22.2 No. 107.3 for safety in electrical equipment, FCC Part 15 Class A for EMI compatibility, and UN38.3 for safe battery transportation. These certifications support compliance with regional electrical and safety regulations.

Q: How should I manage maintenance and battery life?

A: Regular health checks through WiseInsight, periodic firmware updates, and battery condition monitoring are recommended. Lithium‑ion batteries typically offer extended life, but scheduling proactive checks helps prevent unexpected downtime and ensures that runtimes remain sufficient for mission-critical loads.