SKU: 94671406904

PRO-TECH DOUBLE ROUND BIT 1 1/4' X 9/16' RADIUS 3/16' 1/4' SHANK KP303021

Sale price$273.84 Regular price$304.27
Save 10%

Pay in installments of $76.07 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 30 - Aug 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

PRO-TECH DOUBLE ROUND BIT 1 1/4' X 9/16' RADIUS 3/16' 1/4' SHANK KP303021Edge profile router bits Double round profile Carbide Tipped The double round profile router bit is designed for creating decorative mouldings or edge profiles. These cutters allow you to shape two roundovers. A bead over the top corner is possible when increasing the depth of cut. By replacing the guide bearing with a smaller diameter bearing will also allow a fillet (bead) at the bottom of the profile. This router bit has a 6. 35 mm shank (shaft)

Edge profile router bits
Double round profile

Carbide Tipped

The double round profile router bit is designed for creating decorative mouldings or edge profiles. These cutters allow you to shape two roundovers. A bead over the top corner is possible when increasing the depth of cut. By replacing the guide bearing with a smaller diameter bearing will also allow a fillet (bead) at the bottom of the profile.

This router bit has a 6.35 mm shank (shaft) that will fit most small or large routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.

PRO-TECH router bits are manufactured in Taiwan.

 

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection clean and scratch free
  • Hearing protection quality earmuffs
  • Dust masks discard old and dirty masks
  • Gloves for easy handling of material and hand protection
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask

To use router bits safely (and to get the best results from your router), the router bits need to be installed properly into the router's collet. Improper installation of your bits can cause excessive chatter and could increase the likelihood that the bits will break when in use. 

Clean and sharp

First of all, before beginning any routing operation, check your bits to make sure that they are clean, relatively free of pitch, and most of all, sharp. If the bit is dull, chipped, is excessively burned or has any other defect, it should be sharpened or replaced before use. 

Correct collet and collet nut fit

Most router collets have a recess (groove) that needs to click into a circlip that resides inside the collet nut. Failing to ensure that the collet 'clicked' into the collet nut will cause you to struggle to remove the router bit after tightening. This could cause the collet to break or be removed by a technical repair centre.

 

Correct fit inside the collet

When installing the bit into the collet, do not tighten the collet with the bit 'seated.' Instead, insert the bit until the shank (bit shaft) reaches the bottom of the collet, then ease it out about 2 mm before tightening the collet.

When the bit is tightened, there should be no less than  2/3 's of the length of the shank in the collet. If your bit has a shank that is too short, then the bit should be replaced. 

 

Safety gear

There are a few other safety measures to keep in mind whenever you use your router. First of all, remember to always wear appropriate safety gear as indicated above.

Correct speed setting

Second, be sure to set your router to the proper speed for your router bit. Setting your router to an incorrect speed will not only affect the router's performance, but also can cause the bit to break much more easily and even cause bodily harm. The speed at which a router bit turns can be important. The typical router runs at about 22,000 rpm, which is fine for most bits. But as the diameter of the bit increases, you ll want to slow things down.

Also, before beginning any routing operation, be certain that you give the router's motor time to come up to full speed for the chosen setting. Beginning to cut before the bit is at full speed can give less than desired results. 

Observe the following at all times

  • Wear a protective face shield or Safety Glasses to prevent eye and face injury.
  • Wear ear plugs or ear muffs to protect your hearing.
  • Use a respirator or dust mask to give protection from dust particles. Wood dust may remain in the air for hours after using power tools.
  • Always read and follow router operator's manual instructions.
  • Make sure that router rpm's and the bit selected match.
  • Dress properly. Wear short sleeves, no loose fitting clothes, proper footwear and no jewellery. Tie back long hair.
  • Always be sure the router is unplugged before replacing bits and that the switch is off before connecting the router.
  • Be sure the router bit has completing stopped spinning before sitting the router down.
  • Be sure bits, clamps and attachments are secure before starting up.
  • Keep children, pets and visitors at a safe distance.
  • Be especially cautious when working small pieces.
  • Keep hands and fingers away from revolving bits and cutters.
  • Do not operate routers in moist or wet areas.
  • Always grip tool tightly and be prepared at start-up to resist the motor torque.
  • When using a router table, make sure on/off switch is easily accessible.
  • Learn the sound of your router and shut it off at any unfamiliar sounds or irregularities.
    Never start the router with the bit in contact with the material.
  • Always feed in the proper direction, against the direction of bit rotation.
  • Maintain equipment. Replace worn parts, discard worn-out bits and check router periodically. Clean parts with appropriate solvents.
  • Don't operate a tool if you are tired or under the influence of medication, drugs, alcohol or while smoking.
  • Check wood for nails, screws or loose knots before routing.
  • Keep your mind on your work, avoid distractions, work at a comfortable pace and stop before you get tired.

Do a dry run

  • Place the router on the final work surface and test you cut by moving the router over the whole are to cut with THE ROUTER SWITCHED OFF
  • You do not want to waste an expensive piece of wood
  • You do not want to start all over
  • Never met anyone with spare fingers - SAFETY
Part No. Shank dia. Cutting width Cutting Height Radius (r)
KP303021 1/4 inch 1 1/4 inch 9/16 inch 3/16 inch
6.35 mm 31.8 mm 14.29 mm 4.76 mm

 

Length of Shank: 32 mm
Replacement bearing part number: KP100 1-2

 

 



KP303021Router Bits > Profiles > Double Round Over
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 94671406904

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
dacker
Carnegie, US
★★★★★ 5
Rejuvenates your Robovac, but one caution
I was a little wary buying third-party aftermarket parts for my Eufy Robovac 30c, however, all the parts in this kit are virtually identical to OEM parts. I replaced all three brushes and all three filters and let it loose on my Golden Retriever-inhabited living room. I can honestly say the result was a 50% increase in the amount of fur collected. I suspect that over time there is a loss of performance so gradual that it's easy to not notice. I assume the new filters returned the vacuum power to it's original level of suction was a big factor. When I was browsing through all the available choices here on Amazon, a plastic "ring" kept appearing in many of the product images, however, people did not know what it is for or simply did not get one in their shipment. If you look at the photos I've attached one can see that I did indeed get one and figured out its purpose, to remove fur and/or hair from the horizontal brush. The bottom line is that I would definitely buy this item again. =========== EDIT, four weeks later: Since replacing the main roller brush with the one included with this product, I have experienced several “Roller brush is stuck” shutdowns and alerts. In each case, there has been nothing tangled in the brush and the brush was free to spin. I have to say it’s quite annoying to come home expecting the floor to be cleaned but only to find this error long before the job was finished. Today it gave this error twice in one cleaning cycle. I never experienced this problem with the OEM roller brush.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2019
S
Verified Purchase
SFriedman
Louisville, US
★★★★★ 5
Euphy works good as new!
Style: 19 Pack
As soon as I opened the package everything looked the same- pre-filters, filters, main brush, and side brushes. I changed the big brush first;the only issue was the new brush body didn't have the white arrows to help aligning but that didn't affect how the brush worked. I changed filter and pre-filter, and finally the side brushes. When I turned on my "Goophy" and tried to let her run the side brushes were a little too (Goophy's side brushes sounded a little louder). I trimmed the side brushes a little and all was well. Goophy didn't want to run herself but it didn't take long for me to figure out it wasn't the new brushes ;just the operator pushing the wrong button. My Goophy Euphy did what she was supposed to do- vacuum the carpet and tile floor. Goophy Euphy still wanted to take the long way to her charging station which was nothing new and easily corrected. Over all the new brushes and filter restored Goophy Euphy back to when we first used her!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2023
T
Verified Purchase
Turtle Block
Birmingham, US
★★★★★ 4
Don't be cheap like me - buy these and save yourself the hassle!
Style: 19 Pack
I made the mistake of going with another, slightly cheaper set of replacement parts for our Eufy RoboVac 11S. I did not heed the cautionary tales which lead me having to find replacement parts for the replacement parts. This brand fits our vacuum perfectly - the corner brushes don't pop off, the filter is the right size and the roller brush gets sufficiently tangled with cat hair so clearly also a good fit. My only concern (and why I only gave four stars) is - surprise! - the corner brushes. Do they stay on? YES! In fact, they is so secure, I had difficulty swapping one out. Here's the peculiarity of the brand - the "whiskers" on the spinner fell out. I found them all over the floor, on different surface types and under various conditions; they were not getting caught on any one thing. Not all at once, but over two or three uses, one of the corner brushes had become devoid of almost two entire spokes! Ironically, the little guy can't seem to pick up his own mess but I digress. Without the whiskers to grasp, removing the part was difficult. I ended up using a small flathead screwdriver for leverage to pop it off. While the other corner brush appeared to have shed some whiskers as well, it was not in need of replacement. Despite the shedding, this will be my first go-to for replacement parts next go round.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2022
A
Verified Purchase
Afework
Pawtucket, US
★★★★★ 5
Nothing.
Style: 19 Pack
It’s as shown & working properly for now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 1, 2026
M
Verified Purchase
MMK
Alexandria, US
★★★★★ 5
Good resource.
Style: 19 Pack
Tried unsuccessfully to get parts from eufy but they were out of stock Pleased to get what I needed right away here.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 27, 2025

recommand products