SKU: 12307444094

PRO-TECH STRAIGHT BIT 1/4' (6.35MM) X 1'(25.4MM) TWO FLUTE LONG 1/4' SHANK KP201A

Sale price$117.38 Regular price$130.42
Save 10%

Pay in installments of $32.60 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 24 - Sep 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

PRO-TECH STRAIGHT BIT 1/4' (6.35MM) X 1'(25.4MM) TWO FLUTE LONG 1/4' SHANK KP201ADouble flute Straight bit In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth. Excessive length intensifies deflection and vibration, which degrade cut quality and lead to tool breakage. Use a two flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per

Double flute Straight bit

In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth. Excessive length intensifies deflection and vibration, which degrade cut quality and lead to tool breakage.

Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish.

Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.

This router bit has a 6.35mm shank (shaft) that will fit most small routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.

 

PRO-TECH router bits are manufactured in Taiwan. This well-supported and afforable

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection clean and scratch free
  • Hearing protection quality earmuffs
  • Dust masks discard old and dirty masks
  • Gloves for easy handling of material and hand protection
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask

To use router bits safely (and to get the best results from your router), the router bits need to be installed properly into the router's collet. Improper installation of your bits can cause excessive chatter and could increase the likelihood that the bits will break when in use. 

Clean and sharp

First of all, before beginning any routing operation, check your bits to make sure that they are clean, relatively free of pitch, and most of all, sharp. If the bit is dull, chipped, is excessively burned or has any other defect, it should be sharpened or replaced before use. 

Correct collet and collet nut fit

Most router collets have a recess (groove) that needs to click into a circlip that resides inside the collet nut. Failing to ensure that the collet 'clicked' into the collet nut will cause you to struggle to remove the router bit after tightening. This could cause the collet to break or be removed by a technical repair centre.

 

Correct fit inside the collet

When installing the bit into the collet, do not tighten the collet with the bit 'seated.' Instead, insert the bit until the shank (bit shaft) reaches the bottom of the collet, then ease it out about 2 mm before tightening the collet.

When the bit is tightened, there should be no less than  2/3 's of the length of the shank in the collet. If your bit has a shank that is too short, then the bit should be replaced. 

 

Safety gear

There are a few other safety measures to keep in mind whenever you use your router. First of all, remember to always wear appropriate safety gear as indicated above.

Correct speed setting

Second, be sure to set your router to the proper speed for your router bit. Setting your router to an incorrect speed will not only affect the router's performance, but also can cause the bit to break much more easily and even cause bodily harm. The speed at which a router bit turns can be important. The typical router runs at about 22,000 rpm, which is fine for most bits. But as the diameter of the bit increases, you ll want to slow things down.

Also, before beginning any routing operation, be certain that you give the router's motor time to come up to full speed for the chosen setting. Beginning to cut before the bit is at full speed can give less than desired results. 

Speed Settings

Part number Shank dia. Cutting width Cutting Height Radius (r)
KP201A 1/4 in (6.35mm) 6.35 mm (1/4 in) 25.40 mm
(1.00 in)
Straight

 

Length of Shank: 32 mm
Total length: 57.4 mm (shank plus cutting height)

 

 

 



KP201ARouter Bits > Straight Bits > Imperial
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 12307444094

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nick Eubanks
Louisville, US
★★★★★ 4
Great stand for portability, concerns about durability
Size: 155LBS
This is great and lightweight for easy maneuverability when not filled. It is extremely sturdy when filled and the locks on the wheels keep it in place. I use this with a Purple umbrella and it's great. My one complaint is that the umbrella has developed a bit of a lean after several months of use so I don't think this will hold up in the long run.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 19, 2025
A
Verified Purchase
Amazon Customer
Pawtucket, US
★★★★★ 5
Great Service and company
Size: 100LBS
This umbrella stand we purchased does the job our previous heavy metal stands could not do. It stands up to high winds where we were forever standing our umbrella back up with our old stands. When I filled the stand base up with water and sand I accidently locked one of the wheels and pushed it from my truck to our pool patio and ground one of the wheels down to its rim. I messaged Fruiteam asking if I could purchase a new wheel and they sent me a set of 4 no charge. Great product and great customer service!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
H
Verified Purchase
Heather K
Carnegie, US
★★★★★ 5
Perfect! Easy, convenient, definitely recommend
Size: 100LBS, Size: 100LBS
I am so glad I found this base that I can just fill with water. After screwing on the wheels, I used my garden hose to fill it with water and put my 1.5 inch diameter umbrella in and tightened it. Easy peasy. I love that it rolls and I can move it wherever I want, and also lock two of the wheels if needed. Definitely would recommend this one!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2025
M
Verified Purchase
MARIA
Chelsea, US
★★★★★ 5
Sturdy, well built has wheels that makes it easy to move and also lock in place.
Size: 100LBS
Happy with my purchase. Sturdy well built, love that it has wheels makes it easy to move around and wheels lock in place. I choose to fill it with sand and water as it gets really windy where we live this will prevent my umbrella flying to the neighbors house again 😅
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 19, 2025
N
Verified Purchase
NMS Johnson
Grantham, US
★★★★★ 1
Must Read before Purchasing!!!! Height is lost if you use this base!!!!
Size: 100LBS
I was so very excited about this for our umbrella - and then I put it together. I called my adult son to come and take a look - I had to be doing something wrong. To our dismay, I was not. The lowest pole in the umbrella system has 4 welded pieces with holes meant to connect to the legs, thus stabilizing the structure. The lowest pole measures (guestimate) 3 feet. When you choose this system, you do not use the original cross-bars, nor the original lowest pole with the 4 welded pieces. Rather, you use a newly provided lowest piece roughly measuring a foot. In doing so, the structure loses a total of almost 2 feet. For average-height individuals, this would not be a problem. For individuals 6' or greater, this is quite a problem. My son is 6'6. My husband is 6'2. I really wanted the portability of the product. However, we will be returning it for the kind that rest on the cross-bars. I wish someone had mentioned this in the reviews I read and saved me the trouble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2025

recommand products